You may also like




INCLUSIONS
What is included:
✅ PBP LED Ring Flash
✅ 2 Mounting Screws (This mount on the PBP ring light bracket)
✅ Free hot shoe and sync cord works with canon t4/t5/t6 DSLR camera
DESCRIPTION
Now that you bought your T Series Photo Booth Shell Enclosure, you are on your way to building your T Series Photo Booth System. The next step is choosing your ring light for your system.
There are two types of ring lights to choose from. The most common and standard ring light is our PBP Ring Light, but you can also opt-out and use the Alien bee ring flash ABR800. We think it is an overkill for the photo booth, but of course, some photographers have it already and want to use it anyway. For half price, you can simply go with the PBP Ring Light and set your camera settings according to the light current room brightness. The one advantage of using the PBP ring light is that we offer our own warranty and not another manufacturer. What that means is, if something ever goes wrong with our light, we simply ship you a new one and diagnose what went wrong. If the light was damage through negligence and actually not a product failure, then we simply charge you a repair cost. Keep in mind, that you did not have to cancel the event because you had a replacement sent to you versus, manufacturer's warranty. If the ABR800 fails or stop working, we have to call Paul C. Buff and exercise the warranty they have issued. Therefore, we wait until they have all of the paperwork completed. What that means is, you don't have a working light while we wait for them to study the warranty. This is beyond our control.
SPECIFICATIONS
PBP RL-400 RING LIGHT SPECS:
240 LEDs, Color Temperature 5500k-6500k |
Dimmable |
2 models: Flashing and Continuing lights. The power under flash model (need to connect flash sync cable to camera) is 4 times that of continuing lights. |
Operated in AC power |
Creates attractive round-shaped catch lights into the eyes of your model. Often used for microfilm shooting, production ad introduction, Interview, outer makeup light, AD, weeding following taking, Portrait photography… |
Diameter: 102mm, fit for all lens. |
Photo Booth Application:
Related Pages:
* Photo Booth Printer Accessories
* Photo Booth Turnkey Rental Solutions
* Photo Booth Business Bundle Packages
DESCRIPTION
- DNP RX1HS 4"x6" Media includes a set of paper and ribbon, 700 prints per set.
- You can also print (Two) 2″ x 6″ strips printed on one 4″ x 6″
- This RX1HS 4x6 Printer Media replaces the discontinued RX1 4x6 media
- Compatible with the DS-RX1HS printer (and the older RX1 printer if it has been updated with the latest v2.04 firmware update)
Highlights
- For DS-RX1HS & RX1 Dye-Sub Printers
- Creates 2 x 6" & 4 x 6" Prints
- Print Quantity: 1400 Photos (700/Roll)





DESCRIPTION
Look even more professional at your next photo booth event with a proper printer stand. The PBP Printer Stand is easy to set up and break down with 3 easy to assemble pieces. Made in the USA and fabricated with high-quality lightweight aluminum.
This PBP Printer Stand fits most dye-sub printers on the market such as the DNP DSRX1, DNP DSRX1HS, DNP DS40, DS620, HITI P525L, SINFONIA CS2, MITSUBISHI CP-D80DW, MITSUBISHI CP-D90DW, MITSUBISHI CP-K60DW-S, and MITSUBISHI CP-D70DW.
FEATURES
✅ Lightweight Aircraft Aluminum.
✅ Ergonomic Designed To Minimize Risk Of Back Injury
✅ Breaks Down Into 3 Pieces For Easy Transport
✅ Exclusively Designed
✅ Fits Most Dye-Sub Printers
✅ Look Professional At Your Photo Booth Event
SPECIFICATIONS
Printer Stand Specifications:
From ground to the top of printer tray is 27 1/4″ high
Includes:
1 x base plate – 21 3/4″ X 15 3/4″ X 1/4″ |
1 x Stand – 5″ X 3″ X 26 1/2″ |
1 x printer tray – 13 1/2″ X 17 1/2″ X 3/8″ |
VIDEOS
Helpful Pages:





DESCRIPTIONS
RX1 Printer Cover with removable printer catch tray keeps the kids from yanking on those pictures and jamming the printer. Aluminum material light enough and durable, a perfect way to protect your investment and also fit in Hiti P525L printer.
Guarding the printer against kids who takes out the prints unnoticed is quite a pain. Thank goodness for RBA Photo Booths for inventing this solution.
Best of all, the printer cover is not too bulky so it fits with the current RBA road case for it.
If you have the old printer cover, you can also drill a small hole and hang the (printer jam prevention) printer tray.
SPECIFICATIONS
Size: RX1 Printer Cover 14 1/2″ X 13 1/4″ X 12″ |
Jam Preventor Picture Tray 9 1/2″ tall X 9 1/4″ X wide X 3 1/2″ deep. |
INCLUSIONS
What you are going to get
✅ Rx1 printer cover with Catch Tray



FEATURES
DNP RX1 DYE SUB PRINTER FEATURES
• Newly designed compact printer is ideal for Photo Booth applications (12.6” W x 11”H)
• Aimed at portable on-site Event Photography use, weighing only 30 pounds
• Impressive high-volume output with 700, 4”x6” print capacity
• Print sizes of 2”x6”*, 4”x6” and 6”x8” (prints 5×7″** on 6×8 media)
• Earth-friendly, utilizing 25% less power, in peak, idle and running modes
SPECIFICATIONS
Printing Technology: Dye-sublimation thermal transfer |
Maximum Resolution: 300 dpi |
Ink Palette: CMY |
Surface Options: Matte, Glossy |
Print Speed: 2 x 6″: 14.9 seconds |
4 x 6″: 14.9 seconds |
5 x 7″: 23.9 seconds**(printed on 6×8 sheet) |
6 x 8″: 26.9 seconds |
Print Number 2 x 6″: 1,400 sheets |
4 x 6″: 700 sheets |
5 x 7″: 350 sheets**(printed on 6×8 sheet) |
6 x 8″: 350 sheets |
Ribbon: YMC + Overcoat |
Maximum Printable Area: 6 x 8″ (15.24 x 20.32 cm) |
Paper Sizes: 4 x 6″ (10.16 x 15.24 cm) |
6 x 8″ (15.24 x 20.32 cm) |
Paper Types: Dye-sublimation paper |
Computer Interface: USB 2.0 Type-B Connector |
Power Requirements: AC 100 to 240 V, 50/60Hz |
Dimensions (WxDxH): 12.6 x 13.8 x 11.0″ (32 x 35.1 x 27.9 cm) |
Weight: 30 lb (13.61 kg) |
VIDEOS








DESCRIPTION
INCLUSIONS
You will get:
✅ Nimbus Pro V2 Photo Booth Shell
✅ LED Lights
✅ 1 Month FREE Subscription of Curator iPad software
***iPad not included in this listing***
FEATURES
✅ Multi-function wall mount/roamer and traditional stationary booth.
VIDEOS
APPLICATION
- Restaurant
- Nigh Club
- Corporate Events
- Doctors Office
- Dental Office
- Tradeshows
SPECIFICATIONS
NIMBUS PHOTO BOOTH SPECIFICATIONS
Base Plate: | 15.5” x 21” |
Ipad Housing Diameter: | 19.25” |
iPad Wide Stand: | 42" X 12" X 4" |
Total Height: | 61.5” |
Depth from front to rear of pedestal: | 6” |
Total Net Weight: | 27.40lbs |
RECOMMENDATIONS
WHAT ELSE DO I NEED TO HAVE A WORKING PHOTO BOOTH
- Ipad Pro 12.9" 3rd gen - 6th gen
- Ipad softwares: luma booth, amaze booth, touch pix ect
- Air Print
- DNP RX1HS Printer
- Media Kit (1400 prints)
- Sungzu Solar And Ac Powered Portable Power Station
- Nimbus Pro V2 Photo Booth Shell Travel Case
- DNP RX1HS Soft Bag Travel Case
OPTIONAL BUT HIGHLY RECOMMENDED PHOTO BOOTH ACCESSORIES
- Nimbus Pro V2 Photo Booth Shell Travel Case
- DNP RX1HS Soft Bag Travel Case
- Studio Backdrop
VIDEOS
Step by Step and Cool Features You Should Know Before Buying A Photo booth
Nimbus Pro V2 Photo Booth Travel Case
How To Print From Your Dnp Printer To Luma Booth Ipad Using Lumabooth Assistant
HELPFUL PAGES


DESCRIPTION
The T12 LED Aircraft-Grade Aluminum Photo Booth is a standout option for your business. Its user-friendly interface and sleek design ensure efficient operation. Paired with our PBP Ring Light, you'll elevate your photo booth experience. With manual tilt camera capability and adjustable booth angle, it's effortless to capture great poses for both kids and adults.
WHAT YOU ARE GOING TO GET
You will get:
✅ T12 LED Photo Booth Shell
✅ LED Lights
Features
✅ Lightweight Aircraft Aluminum.
✅ White or Black fine powder coat finish
✅ Height Adjustable Head Unit To Accommodate Guests Of All Sizes.
✅ Breaks Down Into 6 Pieces For Easy Transport.
✅ Travel Cases Available.
✅ Fits PBP Ring Flash
✅ Fits Most DSLR Cameras
✅ Fits Microsoft Surface Pro 12.3 inch (versions 3,4,5,6,7 and 7+)
RECOMMENDATIONS
WHAT ELSE DO I NEED TO HAVE A WORKING PREMIER PHOTO BOOTH
- Ring Light
- 160W Strobe Flash (optional)
- Beauty Dish Umbrella (optional)
- Hot Shoe
- EOS Rebel T7 Camera
- Camera A/C Adapter
- Power Strip with USB Plugs
- Microsoft Surface Pro 12.3 inch” ( 4-7+)
- Darkroom Photo Booth Software
- DNP RX1 Printer
- RX1 Media Kit (1400 prints)
- DNP RX1 Aluminum Printer Cover
- 4 Port USB Hub
- Photo Booth SKB Travel Case
- DNP RX1 Printer Bag Case
Note: Shipping cost applies to 48 contiguous states (Alaska, Hawaii, Puerto Rico, and International Extra cost on shipping.)
SPECIFICATIONS
- Weight: 27 lbs
- Height: 158cm / 5.2 ft.
- Base plate: 26”x 20” x.25”
- Cut out: Fit for Microsoft Surface Pro (versions 3,4,5,6,7,7+)
- Size: Headpiece enclosure dimensions: 16.375 inches wide x 25 inches high x 8 inches thick.
FAQs
Q: Does RBA AirPrint Work with Curator iPad Photo Booth
A: YES, it works on any iPad.
Q: Do You Offer Discounts
A: Yes, please ask for a photo booth coupon code. Email us at sales@rbaphotobooths.com
Q: What Are My Financing Options
A: Anyhow you want to approach your investment for your photo booth here at RBA Photobooths, we do accept credit cards, cash checks, and as well as offer financing, if you want to go that route, we offer financing through a third-party company that can help you get your investments together ASAP. So you can get started on your photo booth right away.
Q: How can I track my parcel with the tracking number
A: You have to get the tracking number from the seller. Visit these resources: