Look even more professional at your next photo booth event with a proper printer stand. The PBP Printer Stand is easy to set up and break down with 3 easy to assemble pieces. Made in the USA and fabricated with high-quality lightweight aluminum.
This PBP Printer Stand fits most dye-sub printers on the market such as the DNP DSRX1, DNP DSRX1HS, DNP DS40, DS620, HITI P525L, SINFONIA CS2, MITSUBISHI CP-D80DW, MITSUBISHI CP-D90DW, MITSUBISHI CP-K60DW-S, and MITSUBISHI CP-D70DW.
What is included:
✅ PBP LED Ring Flash
✅ 2 Mounting Screws (This mount on the PBP ring light bracket)
✅ Free hot shoe and sync cord works with canon t4/t5/t6 DSLR camera
Now that you bought your T Series Photo Booth Shell Enclosure, you are on your way to building your T Series Photo Booth System. The next step is choosing your ring light for your system.
There are two types of ring lights to choose from. The most common and standard ring light is our PBP Ring Light, but you can also opt-out and use the Alien bee ring flash ABR800. We think it is an overkill for the photo booth, but of course, some photographers have it already and want to use it anyway. For half price, you can simply go with the PBP Ring Light and set your camera settings according to the light current room brightness. The one advantage of using the PBP ring light is that we offer our own warranty and not another manufacturer. What that means is, if something ever goes wrong with our light, we simply ship you a new one and diagnose what went wrong. If the light was damage through negligence and actually not a product failure, then we simply charge you a repair cost. Keep in mind, that you did not have to cancel the event because you had a replacement sent to you versus, manufacturer's warranty. If the ABR800 fails or stop working, we have to call Paul C. Buff and exercise the warranty they have issued. Therefore, we wait until they have all of the paperwork completed. What that means is, you don't have a working light while we wait for them to study the warranty. This is beyond our control.
PBP RL-400 RING LIGHT SPECS:
| 240 LEDs, Color Temperature 5500k-6500k |
| Dimmable |
| 2 models: Flashing and Continuing lights. The power under flash model (need to connect flash sync cable to camera) is 4 times that of continuing lights. |
| Operated in AC power |
| Creates attractive round-shaped catch lights into the eyes of your model. Often used for microfilm shooting, production ad introduction, Interview, outer makeup light, AD, weeding following taking, Portrait photography… |
| Diameter: 102mm, fit for all lens. |
Related Pages:
* Photo Booth Printer Accessories
* Photo Booth Turnkey Rental Solutions
* Photo Booth Business Bundle Packages
RX1 Printer Cover with removable printer catch tray keeps the kids from yanking on those pictures and jamming the printer. Aluminum material light enough and durable, a perfect way to protect your investment and also fit in Hiti P525L printer.
Guarding the printer against kids who takes out the prints unnoticed is quite a pain. Thank goodness for RBA Photo Booths for inventing this solution.
Best of all, the printer cover is not too bulky so it fits with the current RBA road case for it.
If you have the old printer cover, you can also drill a small hole and hang the (printer jam prevention) printer tray.
| Size: RX1 Printer Cover 14 1/2″ X 13 1/4″ X 12″ |
| Jam Preventor Picture Tray 9 1/2″ tall X 9 1/4″ X wide X 3 1/2″ deep. |
What you are going to get
✅ Rx1 printer cover with Catch Tray
DNP RX1 DYE SUB PRINTER FEATURES
• Newly designed compact printer is ideal for Photo Booth applications (12.6” W x 11”H)
• Aimed at portable on-site Event Photography use, weighing only 30 pounds
• Impressive high-volume output with 700, 4”x6” print capacity
• Print sizes of 2”x6”*, 4”x6” and 6”x8” (prints 5×7″** on 6×8 media)
• Earth-friendly, utilizing 25% less power, in peak, idle and running modes
| Printing Technology: Dye-sublimation thermal transfer |
| Maximum Resolution: 300 dpi |
| Ink Palette: CMY |
| Surface Options: Matte, Glossy |
| Print Speed: 2 x 6″: 14.9 seconds |
| 4 x 6″: 14.9 seconds |
| 5 x 7″: 23.9 seconds**(printed on 6×8 sheet) |
| 6 x 8″: 26.9 seconds |
| Print Number 2 x 6″: 1,400 sheets |
| 4 x 6″: 700 sheets |
| 5 x 7″: 350 sheets**(printed on 6×8 sheet) |
| 6 x 8″: 350 sheets |
| Ribbon: YMC + Overcoat |
| Maximum Printable Area: 6 x 8″ (15.24 x 20.32 cm) |
| Paper Sizes: 4 x 6″ (10.16 x 15.24 cm) |
| 6 x 8″ (15.24 x 20.32 cm) |
| Paper Types: Dye-sublimation paper |
| Computer Interface: USB 2.0 Type-B Connector |
| Power Requirements: AC 100 to 240 V, 50/60Hz |
| Dimensions (WxDxH): 12.6 x 13.8 x 11.0″ (32 x 35.1 x 27.9 cm) |
| Weight: 30 lb (13.61 kg) |
You will get:
✅ Nimbus Pro V2 Photo Booth Shell
✅ LED Lights
✅ 1 Month FREE Subscription of Curator iPad software
***iPad not included in this listing***
FEATURES
✅ Multi-function wall mount/roamer and traditional stationary booth.
| Base Plate: | 15.5” x 21” |
| Ipad Housing Diameter: | 19.25” |
| iPad Wide Stand: | 42" X 12" X 4" |
| Total Height: | 61.5” |
| Depth from front to rear of pedestal: | 6” |
| Total Net Weight: | 27.40lbs |
RECOMMENDATIONS
WHAT ELSE DO I NEED TO HAVE A WORKING PHOTO BOOTH
OPTIONAL BUT HIGHLY RECOMMENDED PHOTO BOOTH ACCESSORIES
Step by Step and Cool Features You Should Know Before Buying A Photo booth
Nimbus Pro V2 Photo Booth Travel Case
How To Print From Your Dnp Printer To Luma Booth Ipad Using Lumabooth Assistant
HELPFUL PAGES
The T12 LED Aircraft-Grade Aluminum Photo Booth is a standout option for your business. Its user-friendly interface and sleek design ensure efficient operation. Paired with our PBP Ring Light, you'll elevate your photo booth experience. With manual tilt camera capability and adjustable booth angle, it's effortless to capture great poses for both kids and adults.
You will get:
✅ T12 LED Photo Booth Shell
✅ LED Lights
Features
✅ Lightweight Aircraft Aluminum.
✅ White or Black fine powder coat finish
✅ Height Adjustable Head Unit To Accommodate Guests Of All Sizes.
✅ Breaks Down Into 6 Pieces For Easy Transport.
✅ Travel Cases Available.
✅ Fits PBP Ring Flash
✅ Fits Most DSLR Cameras
✅ Fits Microsoft Surface Pro 12.3 inch (versions 3,4,5,6,7 and 7+)
WHAT ELSE DO I NEED TO HAVE A WORKING PREMIER PHOTO BOOTH
Note: Shipping cost applies to 48 contiguous states (Alaska, Hawaii, Puerto Rico, and International Extra cost on shipping.)
SPECIFICATIONS
A: You have to get the tracking number from the seller. Visit these resources:
